Aug 3, 2015- Autodesk released Service Pack 1 for AutoCAD Civil 3D 2016. The service pack is now available via the Autodesk Application Manager.
The Service Pack 1 should be available from the Autodesk AutoCAD Civil 3D downloads page any time now.
Here's a listing of the issues resolved by AutoCAD Civil 3D 2016 SP1 from the Read me.
Alignments, Corridors, and Quantity Takeoff
- An issue has been resolved where the Alignment.CreateOffsetAlignment API method did not allow the user to specify Start and End Stations.
- An issue has been resolved where the Takeoff with Limit Extents to Alignment Station Range of the Takeoff command option would produce incorrect results if more than one region was present.
- An issue has been resolved where launching the Corridor Parameter Editor would cause the application to close unexpectedly.
DWG and DGN Export
- An issue has been resolved where intersecting feature line elevation points were not converted correctly on export.
- An issue has been resolved where feature lines created from a corridor had incorrect geometry after conversion to DWG/DGN.
- An issue has been resolved where the color and linetype of feature lines were not converted correctly to DGN.
- An issue has been resolved where custom AutoCAD color books were not properly mapped to DGN color table colors.
- An issue has been resolved where the export would fail if parcels were present in a drawing.
- An issue has been resolved where structures that were represented as sliced solids in profile were lost after export to DWG.
- An issue has been resolved where feature lines and survey figures were flattened to 2D polylines when a drawing was exported to DWG/DGN.
- An issue has been resolved where not specifying a DWS file would cause the application to close unexpectedly.
- An issue has been resolved where selecting a DWS file would cause the application to close unexpectedly.
- An issue has been resolved where surface contours were exploded twice as lines instead of polylines.
- An issue has been resolved where the incorrect UCF file was used for DGN conversion.
- An issue has been resolved where the default seed file path was empty in the Export Settings dialog box.
- An issue has been resolved where line weights were not remapped according to the specified remapping file.
- An issue has been resolved where a surface border was exported to a polyline, but plinegen was not enabled.
- An issue has been resolved where an exception dialog box was displayed when exporting a drawing.
- An issue has been resolved where an error message would appear in an AutoCAD Map Messages dialog box during the export process.
Gravity and Pressure Networks
- An issue has been resolved where pipe network structures would scale incorrectly when displaying in viewports.
- An issue has been resolved where pipe network structures displayed in profile view were incorrectly drawn when the style was set to Display as Boundary.
- An issue has been resolved where multiple parts with the same dimensions could not be added to a pipe network parts list.
- An issue has been resolved where the Material property was missing from crossing pipe labels.
- An issue has been resolved where pressure pipe data shortcuts were not updating after synchronizing.
Hydraflow Storm Sewers
- An issue has been resolved where the Hydraflow Storm Sewer Inlet and Gutter Spread values were shown as the same value regardless of condition.
- An issue has been resolved where the JLC coefficient value could be entered as a negative value.
Import and Attach Coordination Model
- An issue has been resolved where the Coordination Model contextual ribbon was not available.
Linetypes
- An issue has been resolved where a 3D polyline overrule would not work without AutoCAD linetypes.
- An issue has been resolved where blocks used in annotation label styles would display with the current layer’s linetype when XREFed into another drawing.
- An issue has been resolved where linetypes imported from DGN did not honor the PSLTScale setting.
Open InfraWorks 360 Model
- An issue has been resolved where InfraWorks 360 planning pipe networks could not be opened in the Russian version of Civil 3D 2016 when using a Russian template.
- An issue has been resolved where while opening an InfraWorks 360 sqlite model that contained an intersection, the numbers were inconsistent in the import progress bar.
- An issue has been resolved where opening an InfraWorks 360 model with a design road that had a non-zero start station would result in an existing ground profile in AutoCAD Civil 3D that started with a station of zero.
- An issue has been resolved where planning road names were empty when opening a model from an IMX file.
- An issue has been resolved where the entire model was opened after switching to “Select area of interest”.
Plotting and Annotation
- An issue has been resolved where alignment labels that contained expressions did not scale correctly in the layout view.
- An issue has been resolved where parcel segments could not be labeled correctly if they were bisected by an alignment.
- An issue has been resolved where selecting Automatic Publish Settings in Options > Plot and Publish Settings would cause the application to close unexpectedly.
- An issue has been resolved where contour label gaps were scaled incorrectly when panning and zooming in a viewport.
- An issue has been resolved where expressions would not update after using the Import Styles command.
Surfaces and Feature Lines
- An issue has been resolved where pasting surfaces in a particular order would cause an error.
Vault and Data Shortcuts
- An issue has been resolved where Vault projects in a folder were not sorted by name, but by creation date.
- An issue has been resolved where the application would become unresponsive when importing a zip file into a project folder.
- An issue has been resolved where not all drawings were imported into a project when importing a zip file.
- An issue has been resolved where after importing a project with published objects, the published objects would not be listed in Prospector.
- An issue has been resolved where after exporting a project under a folder to a zip file, the project could not be re-imported.
- An issue has been resolved where in the Data Shortcut Manager, if you would associate an alignment and then use the UNDO command, a “source not found” message was displayed.
- An issue has been resolved where after setting the data shortcut working folder, the application would close unexpectedly.
- An issue has been resolved where it took a long time to open a drawing from Vault.
- An issue has been resolved where it took a long time to display the Select Projects to Display dialog box.
- An issue has been resolved where in certain configurations, opening project files through Vault within AutoCAD Civil 3D would take a long time.